Home › Cost
What Gas Line Work Costs
What has to be settled before there is a number at all: whose side of the meter, and whether anything has to be dug.
Read this first
What drives the price on gas work is which side of the meter it falls on, the distance of the run, what the route has to pass through, and the permit and pressure test the work requires. The side of the meter decides whether it is yours to pay for.
Why no number is given
GaslineSafe routes calls to independent contractors who set their own prices. On gas work the range is wide enough that a national figure would mislead more than it helped, and no source we would cite publishes one.
The question that comes before price
Which side of the meter the work is on. On the utility side it may not be a contractor job at all; on the customer side it is, and it is permitted work in most jurisdictions. Establishing that first can remove the cost entirely or define it.
Source: 49 CFR § 192.3, via PHMSA interpretation PI-12-0003.
What drives the rest
Access, mostly. A run in the ground has to be reached, and what is over it — lawn, a driveway, a mature tree — is much of the work before any pipe is touched. Then whether the fault is one point or the whole length.
On a new run, the existing load is the other driver: adding an appliance is a sizing calculation against the whole system, not the new pipe alone.
And the permit
Gas work is separately permitted and separately licensed in most jurisdictions, and an inspection at the end is normal. Ask who is pulling the permit before work starts. The answer should not be you.
For repair work, not for a suspected leak.If you can smell gas, leave and call 911 or your utility from outside; this is the wrong number for that. For everything else — a line, a meter, an appliance connection — we will route you to a contractor covering your area, free of charge to you. Gas work heads this site; other plumbing is handled too.
Call (888) 752-8038